| Powermax30 |
|
|
|
| |
|
| |
|
|
| Handheld plasma system for cutting metal |
|
| |
|
|
| Cut capacity |
Handheld |
| Recommended |
1/4" (6 mm) |
| Maximum |
3/8" (10 mm) |
| Severance |
1/2" (12 mm) |
|
|
| |
|
|
 |
Hand cutting |
|
| |
| Standard system components |
|
|
|
Power supply |
|
T30v hand torch |
|
Extra consumables for cutting |
|
Work cable with clamp, 15' (4.5m) |
|
CSA units include 240/20 amp plug with adapter plugs for 120 V/15 amp and 240 V/20 amp circuits |
|
| |
|
|
|
Rugged carrying case |
|
Enhanced consumable kit |
|
Plasma cutting guide |
|
Cutting gloves |
|
Shoulder strap |
|
| |
|
|
Input Voltages
|
120 - 230 V, 1-PH, 50/60 Hz |
| Input Current @ 2.49 kW |
120 – 230 V, 1PH: 26–13.5 A |
| Rated output Voltage |
83 VDC |
| Output current |
15 – 30 A |
| Duty cycle @ 40°C (104°F) |
35% @ 30 A, 115 V 50% @ 30 A, 230 V |
| Output for 100% duty cycle @ 104°F (40°C) |
18 A @ 120 V, 21 A @ 230 V |
| Maximum OCV |
240 VDC |
| Dimensions with handle |
12" H (305 mm); 6.6" W (168 mm); 14" D (356 mm) |
| Weight with Torch |
20 lbs (9 kg) |
| Gas Supply |
Clean, dry, oil-free air or nitrogen |
| Flow rate |
3.5 scfm @ 65 psi (99.1 l/min @ 4.5 bar) |
| Flow pressure |
80 – 100 psig (5.5 – 6.9 bar) |
| Input power cable length |
10' (3 m) |
| Work cable length |
15' (4.5 m) |
| Warranty period |
Full 3-year power supply warranty and a 1-year torch warranty. |
|
| |
| Engine-driven generator operation |
|
|
| Engine Drive Rating (kW) |
System Output (amps) |
Performance (arc stretch) |
| 5.5 |
30 |
Full |
| 4 |
25 |
Limited |
|
| |
|
|
| Material |
Thickness |
Current |
Maximum cut speed* |
| |
inches |
mm |
amps |
ipm |
mm/min |
| Mild Steel |
18 GA
10 GA
3/16
1/4
3/8 |
1.3
3.4
4.8
6.4
9.5 |
30
30
30
30
30 |
394
87
52
33
15 |
10007
2210
1321
838
381 |
| Aluminum |
18 GA
10 GA
1/4
3/8 |
1.3
3.4
6.4
9.5 |
30
30
30
30 |
399
78
26
11 |
10135
1981
660
279 |
| Stainless Steel |
18 GA
10 GA
1/4
3/8 |
1.3
3.4
6.4
9.5 |
30
30
30
30
|
221
55
24
11 |
5613
1397
610
279 |
|
| |
* Maximum cut speeds are the results of Hypertherm’s labratory testing. For optimum cut performance, actual cutting
speeds may vary based on different cutting applications. Refer to the operator manual for more details. |
|
| |
PLASMA CUTTERS 
